Hello, as mentioned in the title, I am encountering font issues after restoring an HMI project from a .apa file in FactoryTalk View Studio - View Machine Edition version 14.00.00 (CPR 9 SR 14). The fonts on my graphic display appear distorted, making it challenging to work with. Have you faced similar problems before or do you have any tips on resolving this issue? Your insights would be greatly appreciated. Thank you!
When working with fonts, it's important to note the difference between the desired and actual font being used. In the latest version 11, Arial Unicode MS has replaced Arial as the default font. If you're seeing a "weird" font that you weren't expecting, it could be due to the font defaulting to Arial Unicode MS because the selected font isn't supported on your system. Make sure you have the necessary support installed for the font you actually want to use.
Thank you for your prompt reply. The HMI displays were created on a different computer, which is why the font appears different in the initial design (left side of the screenshot). To achieve the desired font, I have to first select a different font and then switch back to Arial Unicode MS. However, when I restore the project, the fonts revert to a different version of Arial Unicode MS, rather than the desired one seen in the screenshot (1/00 - Outdoor air temperature). In summary, I aim to have all fonts matching the preferred style displayed at the top (1/00 - Outdoor air temperature), but the restoration process alters them.
It seems that the SizeToFit feature is affecting the sizing of text objects. When Arial Unicode MS is not available on another computer, the text objects are resized to fit the dimensions of Arial. It is considered a best practice to avoid using SizeToFit and ensure that all text objects have consistent dimensions for optimal design.
I wasn't aware that this option was available. I'll make sure to update all text objects accordingly. Thank you for your help!
Answer: 1. Q: I am facing font distortion issues after restoring an HMI project from a .apa file in FactoryTalk View Studio. How can I resolve this problem? To resolve font distortion issues in FactoryTalk View Studio, you can try adjusting the font settings within the project, ensuring compatibility with the version you are using. Additionally, checking for any updates or patches for the software might help in resolving this issue.
Answer: Font distortion issues can occur due to compatibility issues between the version of the .apa file and the software being used. It is essential to ensure that the fonts used in the project are compatible with the software version to avoid distortion problems.
Answer: To prevent font distortion when restoring an HMI project, make sure to use fonts that are supported by the software version you are working with. It is also recommended to create backups of projects and regularly check for updates or patches to address any compatibility issues that may arise.